Fast erect temporary storage tank for the temporary storage of recovered oil.

Application: 

Fast Erect Temporary Storage Tanks are primarily used in oil spills for the temporary storage of oil that has been recovered. In an oil spill the oil is contained with oil containment boom, recovered with a skimmer and deposited into a Fast Erect Temporary Storage Tank. Our tanks are popular because they are easy to use and set up as no tools are required for assembling.

Capacities Available: 500, 1000, 2000, 3000, 4000 and 5000 US Gallons

Specifications: Fast Erect Temporary Storage Tanks

Overall Dimensions: Standard height is 3 ft tall, length and width depend on capacity

Frame: Fabricated from marine grade aluminum that allow for a fast and easy assembling as no tools are required to set up.

Fabric: Manufactured with premium 22 oz. PVC or 24 oz. XR-5B Elvaloy coated polyester fabric.

Tension Members: Depending on capacity the tank will have 2 or 4 straps across the top.

Ground Mat: Light weight yet heavy duty.

Carrying/Storage Bag: manufactured with 22 oz. fabric and includes handles for carrying.

Anchoring Bolts: Provided for each post, to be driven/pushed into the ground.

Optional Fill/Drain Port: Our tank can be provided with 1 each drain port that includes a camlock fitting for ease and quickness of hooking up hoses.

Fabric Options: 24 oz. XR-5B fabric for better chemical resistance.

51” Floating Marker Lights.

Floating Marker Light assemblies are most commonly used to indicate caution and location of Turbidity Barriers around work areas in marine construction jobsites. Also very commonly used around oil spills indicating the location of the oil containment barrier. 

Our Floating Marker Light assemblies use a Day/Night sensor that automatically turns on at dusk and off at dawn, flashes every 3 seconds and has a 1 mile visibility rating. Installation is as simple as throwing it in the water and clipping it to the floating barrier, dock or boat via the clip on a 6 ft lanyard.

24” (61 cm) Above Water Line.

27” (69 cm) Below Water Line.

51” (130cm) Overall Height.

6ft (1.83 m) Tether Line w/Clip.

Floating Marker Lights are ideal for:

• Indicating “Location & Caution” around marine construction work areas.
• Around Marinas to indicate / illuminate waterways.
• In lakes around campsite swimming areas to keep boats out.
• Indicating end of docks for boating safety purposes.

The Day/Night sensor automatically turns on at dusk and off at dawn, flashes every 3 seconds and has a 1 mile visibility. Operates on 2 – standard “D” cell batteries. (not included)

30” fast deployment oil containment boom.

Also known as Fence Boom, with top tension cable is ideal for containing oil spills and it is widely used by contract emergency response companies. Fast Deployment boom can be stored, deployed and retrieved from a reel. A 1000’ (300m) can be deployed from a reel in approximately 8 to 10 minutes.

Specifications: 30” Fast Deployment Coastline Oil Containment Boom

Overall Height: 30” (76.2 cm)

Freeboard: 10” (25.4 cm)

Skirt / Draft: 20” (50.8 cm)

Fabric: Premium 22 oz. / yd2 PVC Yellow Fabric

Top Cable: 1/4 “ (6 mm) Stainless Steel cable sheathed with a ½” poly tube.

Ballast / Bottom Tension: 3/8” (9.5 mm) Hot Dip Galvanized Ballast Chain.

Fiberglass Stiffener: 3/8” x 23” fiberglass batten stiffener between floats for added support.

Connectors: ASTM Universal Marine grade aluminum connectors with stainless steel toggle pin.

Total Tensile Resistance: 10,600 lbs. (1.451 KG)

Section Length: Available in 100’ (30m) and 50’ (15m) lengths

Accessories that may be required for your spill:

Anchor Systems – In Water • Anchor Systems – On Land • Floating Marker Lights • Floating Tow Bridle • Piling Attachment System • Boom Separators • Absorbent Boom • Absorbent Pads.

Alternative Option: If you are NOT limited by storage (space) or workers our 30” Standard Oil Containment Boom will be a great alternative without the need for a reel and power pack.

Floating tow bridle.

Boom Repair Kits are the most complete in the industry as they have just about everything that you could need to repair an Oil Containment Boom or Turbidity Barrier. You’ll be able to repair just about any tear caused by dragging over sharp edges, rocks, or mishandling of either product.

You’ll be able to replace lost toggle pins, shackles or connector bolts if needed.

Boom Repair Kits come complete with:

• Hot Air Heat Gun, complete with nozzle. Available in 110 or 220v
• Roll of fabric – 10” x 25’
• Scissors
• Silicone Roller
• Toggle pins (2)
• 5/16” Shackles (2)
• Nuts and Bolts (10 ea)
• Picture instructions
• Waterproof Tool Box

Accessories that may be required for the job:

Water anchor systems.

Enviro-USA’s Water Anchoring Systems are available in 25, 40, or 60 lbs and are used to keep Turbidity Barriers in place while the barrier is surrounding the work area. Anchor systems are also used to keep Oil Containment Boom in place while allowing for the recovery / clean up of an oil spill to take place.

Anchor systems are most commonly used in bodies of water that are subject to currents, tide changes, windy conditions, choppy water, or in boating and recreational areas.

Enviro-USA’s Water Anchor Systems include:

• 1 each – 25lb, 40lb, or 60lb Danforth type anchor
• 8’ of 3/8” leader chain
• 60’ of ½” nylon rope
• 12” heavy duty inflatable marker buoy
• 6’ of ½” painter line
• Available, optional trip line

Enviro-USA’s Water Anchor Systems are completely assembled and ready to be deployed. Attaching the anchor system to the Turbidity Barrier or Oil Containment Boom is as easy as clipping it on. Anchor systems are in stock and can be shipped with your Oil Containment Boom or Turbidity Barrier order.

Accessories that may be required for the job:

Piling Attachment System • Boom Separators • Land Anchor Systems • Absorbent Boom • Floating Marker Lights • Absorbent Pads